Dorries Scharmann DBF63 - 2 Axis Lathe

Subscription:
Monthly
$20.00
Choose
Quarterly
$58.00
Choose
Annual
$225.00
Choose

Sample NC Program for this 2 Axis Lathe post processor:

N1 %_N_lathe_test_MPF
N2 ;$PATH=/_N_WKS_DIR/_N_WPD
N3 ;TAPE lathe_test 
N4 ;MACH 5046 
N5 ;PART 12345  CREATED 08/10/20 09:48:27 
N6 ;
N7 ;***************************************
N8 ;            TOOLING LIST 
N9 ;***************************************
N10 ;
N11 ; STA.1   CNMG-432-O/S 1    CNMG-432 L 
N12 ; STA.2   DNMG-432-O/S 2    DNMG-432-L 
N13 ; STA.4   LH_OD_THRO/S 4    OD THREADING TOO\ 
N14 ; STA.40  500_DRILLO/S 40   1/2" DRILL 
N15 ; STA.41  OD_THREADO/S 41   OD THREADING TOOL 
N16 ;           OPERATION NUMBERS           
N17 ;***************************************
N18  
N19 ;N5000 MAIN_ROUGH_FACE_CANNED
N20 ;N5010 MAIN_FINISH_FACE
N21 ;N5020 DRILL_FACE_HOLE
N22 ;N5030 THREAD_OD_OP
N23 ;N5040 TREAD_AUTO
N24  
N25 ;***************************************
N26 ;MACHINE: DORRIES SCHARMANN DBF630 MACHING CENTER 
N27  
N28 ;*************************************** 
N29 T 1 ; MAIN_ROUGH_FACE_CANNED
N30 TCH
N31 ;*************************************** 
N32 M38511000  ; CHIP CONVEYOR
N33 ;*************************************** 
N34 Q5000 G00 G54 G64 G95 G17 D0 X0 Y0 B0 AA=0 T2
N35 M39521000  ; RINSE GUTTER X ON
N36 M00100005 M42 ; UNCLAMPED
N37 GEOAX (1,U)    ; CHANGE U-AXIS (5) TO X-AXIS (2)
N38 DIAMON
N39 G54 G18
N40 T154
N41 LIMS=350
N42 G96 S600
N43 G0 X3.5 Z.3
N44 X3.0916 Z.108
N45 G1 Z.003 F.004
N46 X-.0626
N47 G0 Z.3
N48 X3.5
N49 G1 X3.0916 Z.103 F.004
N50 Z.003
N51 X-.0626
N52 G0 Z.103
N53 Z.3
N54 X3.5
N55 T172
N56 M39520000  ; RINSE GUTTER X OFF
N57 M00100000 M9
N58 DIAMOF
N59 GEOAX()
N60 T154
N61 X3.205 Z.0958
N62 G1 X2.995 F.004
N63 Z-3.0877
N64 X3.0916
N65 G0 X3.2016
N66 Z.0958
N67 G1 X2.8984 F.004
N68 Z-3.0877
N69 X2.995
N70 G0 X3.105
N71 Z.0958
N72 G1 X2.8018 F.004
N73 Z-3.06
N74 X2.8572 Z-3.0877
N75 X2.8984
N76 G0 X3.0084
N77 Z.0958
N78 G1 X2.7052 F.004
N79 Z-3.0117
N80 X2.8018 Z-3.06
N81 G0 X2.9118
N82 Z.0958
N83 G1 X2.6086 F.004
N84 Z-2.997
N85 X2.6476
N86 G3 X2.696 Z-3.007 I0. K-.0343
N87 G1 X2.7052 Z-3.0117
N88 G0 X2.8152
N89 Z.0958
N90 G1 X2.512 F.004
N91 Z-2.997
N92 X2.6086
N93 G0 X2.7186
N94 Z.0958
N95 G1 X2.4154 F.004
N96 Z-2.997
N97 X2.512
N98 G0 X2.622
N99 Z.0958
N100 G1 X2.3188 F.004
N101 Z-2.997
N102 X2.4154
N103 G0 X2.5254
N104 Z.0958
N105 G1 X2.2222 F.004
N106 Z-2.997
N107 X2.3188
N108 G0 X2.4288
N109 Z.0958
N110 G1 X2.1256 F.004
N111 Z-2.997
N112 X2.2222
N113 G0 X2.3322
N114 Z.0958
N115 G1 X2.0288 F.004
N116 Z-2.997
N117 X2.1256
N118 G0 X2.2356
N119 Z.0958
N120 G1 X1.9322 F.004
N121 Z-2.997
N122 X2.0288
N123 G0 X2.1388
N124 Z.0958
N125 G1 X1.8356 F.004
N126 Z-2.997
N127 X1.9322
N128 G0 X2.0422
N129 Z.0958
N130 G1 X1.739 F.004
N131 Z-2.997
N132 X1.8356
N133 G0 X1.9456
N134 Z.0958
N135 G1 X1.6424 F.004
N136 Z-2.997
N137 X1.739
N138 G0 X1.849
N139 Z.0958
N140 G1 X1.5458 F.004
N141 Z-2.997
N142 X1.6424
N143 G0 X1.7524
N144 Z.0958
N145 G1 X1.4492 F.004
N146 Z-2.997
N147 X1.5458
N148 G0 X1.6558
N149 Z.0958
N150 G1 X1.3526 F.004
N151 Z-2.9865
N152 G2 X1.4376 Z-2.997 I.0425 K.0802
N153 G1 X1.4492
N154 G0 X1.5592
N155 Z.0958
N156 G1 X1.256 F.004
N157 Z-2.9063
N158 G2 X1.3526 Z-2.9865 I.0908 K0.
N159 G0 X1.4626
N160 Z.0958
N161 G1 X1.216 F.004
N162 Z-.0171
N163 X1.236 Z-.027
N164 G3 X1.256 Z-.0513 I-.0242 K-.0243
N165 G0 X3.105
N166 Z.3
N167 X3.5
N168 G1 X1.416 Z.0958 F.004
N169 X1.216
N170 Z-.0171
N171 X1.236 Z-.027
N172 G3 X1.256 Z-.0513 I-.0242 K-.0243
N173 G1 Z-2.9063
N174 G2 X1.4376 Z-2.997 I.0908 K0.
N175 G1 X2.6476
N176 G3 X2.696 Z-3.007 I0. K-.0343
N177 G1 X2.8572 Z-3.0877
N178 X3.0916
N179 G0 X3.2916
N180 Z.3
N181 X3.5
N182 T172
N183 M39520000  ; RINSE GUTTER X OFF
N184 M00100000 M9
N185 DIAMOF
N186 GEOAX()
N187  
N188 ;*************************************** 
N189 T 2 ; MAIN_FINISH_FACE
N190 TCH
N191 ;*************************************** 
N192 Q5010 G00 G54 G64 G95 G17 D0 X0 Y0 B0 AA=0 T3
N193 M39521000  ; RINSE GUTTER X ON
N194 M00100005 M42 ; UNCLAMPED
N195 GEOAX (1,U)    ; CHANGE U-AXIS (5) TO X-AXIS (2)
N196 DIAMON
N197 G54 G18
N198 T254
N199 LIMS=3000
N200 G96 S450
N201 G0 X1.4476 Z0.
N202 G1 X-.0626 F.005
N203 G0 Z.3
N204 T272
N205 M39520000  ; RINSE GUTTER X OFF
N206 M00100000 M9
N207 DIAMOF
N208 GEOAX()
N209 T254
N210 X1.0502 Z.0616
N211 G1 X1.2316 Z-.0292 F.005
N212 G3 X1.25 Z-.0513 I-.022 K-.0221
N213 G1 Z-2.9063
N214 G2 X1.4376 Z-3. I.0938 K0.
N215 G1 X2.6476
N216 G3 X2.6916 Z-3.0092 I0. K-.0313
N217 G1 X2.8732 Z-3.0999
N218 G0 X3.5
N219 Z.3
N220 T272
N221 M39520000  ; RINSE GUTTER X OFF
N222 M00100000 M9
N223 DIAMOF
N224 GEOAX()
N225  
N226 ;*************************************** 
N227 T 40 ; DRILL_FACE_HOLE
N228 TCH
N229 ;*************************************** 
N230 Q5020 G00 G54 G64 G95 G17 D0 X0 Y0 B0 AA=0 T4
N231 M39521000  ; RINSE GUTTER X ON
N232 M00100005 M42 ; UNCLAMPED
N233 GEOAX (1,U)    ; CHANGE U-AXIS (5) TO X-AXIS (2)
N234 DIAMON
N235 G54 G18
N236 T4054
N237 G0 X0.
N238 G0 X0. Z.1 S1200 M03
N239 G1 Z-.75 F.005
N240 G0 Z.1
N241 Z.3
N242 T4072
N243 M39520000  ; RINSE GUTTER X OFF
N244 M00100000 M9
N245 DIAMOF
N246 GEOAX()
N247  
N248 ;*************************************** 
N249 T 4 ; THREAD_OD_OP
N250 TCH
N251 ;*************************************** 
N252 Q5030 G00 G54 G64 G95 G17 D0 X0 Y0 B0 AA=0 T5
N253 M39521000  ; RINSE GUTTER X ON
N254 M00100005 M42 ; UNCLAMPED
N255 GEOAX (1,U)    ; CHANGE U-AXIS (5) TO X-AXIS (2)
N256 DIAMON
N257 G54 G18
N258 T454
N259 LIMS=3000
N260 G96 S1200
N261 G0 G96 X1.45 Z-.15 R0. S1200 M03
N262 G1 X1.35 F.005
N263 G0 X1.15
N264 G33 Z-.85 I0. K0.
N265 G0 X1.35
N266 Z-.15
N267 X1.15
N268 G33 Z-.85 I0. K0.
N269 G0 X1.35
N270 Z-.15
N271 X1.15
N272 G33 Z-.85 I0. K0.
N273 G0 X1.35
N274 Z-.15
N275 X1.45
N276 T472
N277 M39520000  ; RINSE GUTTER X OFF
N278 M00100000 M9
N279 DIAMOF
N280 GEOAX()
N281  
N282 ;*************************************** 
N283 T 41 ; TREAD_AUTO
N284 TCH
N285 ;*************************************** 
N286 Q5040 G00 G54 G64 G95 G17 D0 X0 Y0 B0 AA=0 T6
N287 M39521000  ; RINSE GUTTER X ON
N288 M00100005 M42 ; UNCLAMPED
N289 GEOAX (1,U)    ; CHANGE U-AXIS (5) TO X-AXIS (2)
N290 DIAMON
N291 G54 G18
N292 T4154
N293 LIMS=3000
N294 G96 S1200
N295 G0 G96 X1.45 Z-.15 R1.45 S1200 M03
N296 G1 X1.45 Z-.15
N297 G0 X1.06
N298 G33 Z-.85 I0. K.05
N299 G0 X1.45
N300 Z-.15
N301 X1.15
N302 G33 Z-.85 I0. K.05
N303 G0 X1.45
N304 Z-.15
N305 X1.15
N306 G33 Z-.85 I0. K.05
N307 G0 X1.45
N308 Z-.15
N309 T4172
N310 M39520000  ; RINSE GUTTER X OFF
N311 M00100000 M9
N312 DIAMOF
N313 GEOAX()
N314 G00 Z25 M9 M39520000
N315 G00 G53 AA=0 B=0
N316 M30
 //#//*//:// PPINFO        53.73       52.51     0


Return To Top Of Page